ds-129 rev e saronix 5v, true ttl nct series crystal clock oscillator technical data 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 saronix frequency range: 500 khz to 66.6667 mhz frequency stability: 25, 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, aging, shock and vibration. temperature range: 0c to +70c or -40 to +85c(limited frequencies) -55c to +125c operating: storage: supply voltage: +5 vdc 10% supply current: 500 khz to 20 mhz: 20+ to 66.6667 mhz: max @ 25c 30ma 65ma description a crystal controlled, hybrid oscillator circuit that produces a true ttl output characteristic at frequencies between 500 khz and 66.6667 mhz. the device is mounted in a 14-pin dip-compatible, all metal hermetic package. physically and functionally interchangeable with all major manufacturers' devices. applications & features ideal for high performance risc and cisc based products true ttl level for low emi broad frequency range to 66.6667 mhz output waveform actual size ttl output: symmetry: rise & fall times: 0 level: 1 level: load: 40/60% max @ 1.5 vdc level 8ns max: 500 khz to 25 mhz 6ns max: 25+ to 66.6667 mhz 0.5v max 2.5v min 1 to 10 ttl gates (1.6ma per gate) mechanical: mil-std-883, method 2002, condition b mil-std-883, method 2003 mil-std-883, method 2004, condition b2 mil-std-883, method 2007, condition a mil-std-202, method 215 mil-std-202, method 210, condition a, b or c environmental: gross leak test: fine leak test: thermal shock: moisture resistance: mil-std-883, method 1014, condition c mil-std-883, method 1014, condition a mil-std-883, method 1011, condition a mil-std-883, method 1004 part numbering guide: nct 0 50 c - 4.0000 frequency stability tolerance: a = 25 ppm b = 50 ppm c = 100 ppm type shock: solderability: terminal strength: vibration: solvent resistance: resistance to soldering heat: frequency category 40 = 500 khz to 4.0 mhz 50 = 4.0+ to 20.0 mhz 70 = 20.0+ to 66.6667 mhz gnd 0.5 v 1.5 v 2.5 v v dd t f t r ttl th t symmetry = x 100(%) th t max over temperature 40ma 70ma temperature range 0 = 0 to +70c 2 = -40 to +85c (only available at certain frequencies, please contact saronix)
all specifications are subject to change without notice. ds-129 rev e saronix nct series crystal clock oscillator technical data 5v, true ttl 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 saronix package details test circuit gnd power supply ma m vm oscillator v cc out pin 14 pin 8 pin 7 pin 1 test point c l = 15pf ( note a ) mmbd7000 or equiv r l = 390 ? note a: c l includes probe and fixture capacitance 21.0 .825 max max 5.08 .200 max .46.08 .018.003 15.24.13 .600.005 pin 1 n/c pin 14 v cc 4.57.13 .180.005 (4) glass insulators 7.62.13 .300.005 pin 8 output 12.19.13 .480.005 pin 7 gnd 0.91 .036 6.35.51 .2500.02 13.0 .510 max denotes pin 1 saronix xtal osc scale: none ( dimensions in ) mm inches * exact locations of items may vary standard marking format * includes date code, frequency & part number
|